 |
acssyringe650wtip
Art Clay Silver - 650 Low Fire - Syringe Type (1 Tip) (10 grams)
10 g syringe containing 650 low fire clay, 1 tip included.
Price: $ 38.55
|
|
email to a friend |
|
 |
acs650
Art Clay Silver - 650 Low Fire - Clay Type (20 grams)
20 g of the new low-fire, compatible with glass. Use for projects with glass cabochons, rhinestones, etc. Does not fume glass.
Price: $ 66.50
|
|
email to a friend |
|
 |
acssyringe650refill
Art Clay Silver - 650 Low Fire - Syringe Type Refill (10 grams)
10 g syringe containing 650 low fire clay, refill. No "tip" included.
Price: $ 34.80
|
|
email to a friend |
|
 |
acsoilpaste
Art Clay Silver - Oil Paste - (10 grams)
10g oil paste, comes with oil to dilute. Use to repair damaged, fired pieces, attach pin backs after firing. It can be used to attach fired pure silver pieces together, or to add pure silver findings to fired pieces. Must be fired at 1472?F for 30 min, although a torch may be used when joining fine silver bezel wire seams.
Price: $ 46.95
|
|
email to a friend |
|
 |
acs-650slo20g
Art Clay Silver - 650 Low Fire Slow Dry - Clay Type (20 grams)
20 g package. This is the Low fire (1200F) and the slow dry, so that you have about 10 minutes working time. An excellent addition to the ACS line up.
Price: $ 66.50
|
|
email to a friend |
|
|
|
 |
acs650syringe3tip
Art Clay Silver - 650 Low Fire - Syringe Type (with 3 Tips) (10 grams)
A syringe of the low-fire 650 art clay silver, 10 gr., with a selection of 3 different tips.
Price: $ 46.80
|
|
email to a friend |
|
 |
acs650paste
Art Clay Silver - 650 Low Fire - Paste Type (20 grams)
For attaching Art Clay Silver 650 Low Fire unfired pieces together, filling in cracks of unfired pieces and painting directly onto leaves, paper, etc. 20 g bottle.
Price: $ 61.90
|
|
email to a friend |
|
 |
acscs-001
Art Clay Silver - Cutter/Scraper - (1)
For cutting off pieces, scraping up scraps, etc. Actually - the uses are pretty obvious, aren't they? 3.75 x 2 inches. 50mm x 96mm
Price: $ 3.45
|
|
email to a friend |
|
 |
acsoverlaypaste
Art Clay Silver - Overlay Paste - (15 grams)
High silver content paste, fires at same temperature as the low fire. Paint onto porcelaine and fire. 15 gram jar.
Price: $ 56.30
|
|
email to a friend |
|
 |
acsf-111
Art Clay Silver - Stainless Steel Mini-Brush - (1)
Mini Stainless Steel brush. 6 inch double ended brush, with flat and angled bristles. Perfect for tight spaces and inside crevices. (photo shows close up of both ends, one brush on each end.)
Price: $ 12.20
|
|
email to a friend |
|
|
|
 |
acs-s10324
Art Clay Silver - Small Photopolymer Sheet - (1)
Photopolymer Sheet (4.125" X 5.75") This UV-sensitive plastic can be exposed much like a photograph to create textured plate for creating your own designs. In a nutshell, mask the plastic sheet with your design on a transparency, expose to strong UV light - sunlight or artificial - and then rinse and brush in water. Bingo! Explicit instructions here. Sample 1, 2. Smells funny - if you have a sensitivity to that. 116mm x 150mm By the each.
Price: $ 10.90
|
|
email to a friend |
|
 |
acspaper
Art Clay Silver - Paper Type - (10 gr)
Silver Paper Type 10g. Approximately 3"x3". Fold it, pleat it, or punch out shapes for appliqu?. Unique paper-thin sheet of silver clay that needs no drying time. When used alone, requires kiln firing. Pieces created only of paper type must be kiln fired. Firing by gas torch or stovetop may cause melting. Used as an appliqu?, pieces can be fired using any of the three methods.
Price: $ 43.50
|
|
email to a friend |
|
 |
acs-moldablestuff
Art Clay Silver Supplies - Oyumaru - Moldable Stuff - (1)
For making molds. If ever any product on the planet needed a "do not eat" sticker, this would be it. This just looks so much like some exotic desert click here for a better view). The instructions are in charming Japanglish, but the overview is, if you warm this stuff in hot water, it becomes soft and moldable, and you can press stuff into it to make a mold, and then press the clay into it. (It hardens as it cools.) It is reusable, just reheat in water and reuse.
Price: $ 11.65
|
|
email to a friend |
|
 |
acsteflon
Art Clay Silver Supplies - 4 x 4 inch Teflon Sheet - (1)
4 x 4 inch square, excellent for not having the clay stick to it. Be careful not to slice it up with your knife when you are trimming. By the each.
Price: $ 2.00
|
|
email to a friend |
|
 |
acsf-115
Art Clay Silver Supplies - Refillable Water Brush - (1)
Water brush with refillable chamber. Useful for smoothing pieces prior to firing. I remember buying something like this with ink in it back in the seventies for brush calligraphy. Really a cool sort of thing. Instructions on back, steps 1, 2, 3, 4, By the each.
Price: $ 14.95
|
|
email to a friend |
|
|
|
 |
acsf-125
Art Clay Silver Supplies - Graduated Slat Sets - (Set)
A set of plastic slats in different thicknesses to control the thickness of the clay when you roll it out. Contains 2 each of six different gauge plastic slats. Now you can roll our your clay to the desired thickness without a second guess. Colour-coded for each of use. May vary from picture. (Set)
Price: $ 20.95
|
|
email to a friend |
|
 |
acstk-01
Art Clay Silver Supplies - Tool Kit -
A whole whack of tools. The basics for working with Art Clay! Includes: Plastic Roller, Plastic Strips, Mini File Set - 12 files, Flat Paint Brush, Fine Pointed Paint Brush, Spatula Clean-up Tool, Adjustable Ring Sizer, Stainless Steel Brush, Bamboo Skewer, Craft Knife, Cutter Scraper, and the Fabric Tool Roll w/ Tie.
Price: $ 49.54
|
|
email to a friend |
|
 |
acsf-003
Art Clay Silver Supplies - Clear Acrylic Roller - (1)
Hollow roller, use to roll out clay, also to form curves over, in, around. Yes, it's a just a tube, but a very useful tube. 6 inches long x 7/8 across. By the each.
Price: $ 2.95
|
|
email to a friend |
|
 |
acsf-029
Art Clay Silver Supplies - Stainless Steel Brush - (1)
Long bristle stainless steel brush for polishing/burnishing fired, finished pieces. Take the white, rough just fired piece (after it cools down) and brush briskly - the metal will start to shine right away. By the each.
Price: $ 10.25
|
|
email to a friend |
|
 |
acs-s10483
Art Clay Silver Supplies - Fine Silver Casting Grain - (10 grams)
Pure silver lumpies to add to you metal clay creations. These are pure silver (99.9%), - not sterling silver (92.5%). To add them to your creations, add some syringe- or paste-type and gently push them into the wet clay. Sizes and shapes vary.
Price: $ 32.40
|
|
email to a friend |
|
|
|
 |
acscorkclay
Art Clay Silver Supplies - Cork Clay - (1)
Totally cool stuff. This looks like clay, but molds and models with your fingers. Dry overnight, or big pieces for a couple of days or in a dehydrator. Burns out cleanly. Keep it moist and it will last for a long time. Block is about the size of paperback novel. (4 x 6 x .75 inches)
Price: $ 14.65
|
|
email to a friend |
|
 |
acsbz-006
Metal Clay Supplies - Activated Carbon - Coal (2 lbs)
Coal Activated Carbon (2lbs) - BRONZclay must be completely surrounded by activated carbon during the firing process. This carbon creates a rainbow colored effect after firing. The carbon can be used for at least 12 firings. CANNOT BE USED WITH COPPRclay! By the pack of 2 lbs.
Price: $ 8.99
|
|
email to a friend |
|
 |
acsbz-004
Metal Clay Supplies - Activated Carbon - Coconut Shell (2 lbs)
Coconut Shell Activated Carbon (2lbs) - BRONZclay and COPPRclay must be completely surrounded by activated carbon during the firing process. The carbon can be used for at least 12 firings. By the pack of 2 lbs.
Price: $ 8.99
|
|
email to a friend |
|
 |
acsbz-008
Metal Clay Supplies - Small Firing Pan with Lid - Stainless Steel (1)
Stainless Steel Firing Pan with Lid - (exterior dimensions 7.5" L x 6.375" W x 2.5" H) holds 15oz of carbon for firing BRONZclay or COPPRclay in a kiln.
Price: $ 19.15
|
|
email to a friend |
|
 |
acssandpaper2000
Tools - Sandpaper - 2000 grit (sheet)
Fine grit sandpaper. Even I can't imagine that you need a photograph of sandpaper. The back of the paper is shown here. (sheet)
Price: $ 2.95
|
|
email to a friend |
|
|
|
 |
acsagateburnisher
Tools - Agate Burnisher - (1)
Burnishing stick, with a blade made of agate. Use this to burnish the fired clay to bring a high polish to raised areas w/o affecting the areas around it (see inset in photo.) By the each.
Price: $ 19.85
|
|
email to a friend |
|
 |
s27620
Tools - Beehive Kiln - Ceramic Inserts (set of 3)
Ceramic inserts for the Beehive kiln - for firing metal clay.
Price: $ 29.95
|
|
email to a friend |
|
 |
acsr-050
Tools - Tapered Ring Mandrel - Wood (1)
For making rings on. Polished, varnished wood. No size markings. Comes with stand, handy for holding rings upright for decorating and drying so you don't get a flat spot. Rotates freely on stand. About 10.25 inches long. By the each.
Price: $ 32.95
|
|
email to a friend |
|
 |
acsf-210
Tools - Sanding Sponge - Variety Pack (Pack of 4)
Four sanding sponges - 5.5 x 4.5 inches. Four different grits - Fine (320-400 grit), Superfine (500-600 grit), Ultrafine (800-1000 grit), and Microfine (1200-1500 grit). I leave it to you to try and remember wether Micro is smaller than Ultra. At least they are labled. Can be used on the greenware (pre-fired) clay or post-fired, on the metal. 1 of each in the package. (Pack of 4)
Price: $ 17.95
|
|
email to a friend |
|
 |
s27621
Tools - Beehive Kiln - Replacement Element (1)
Replacement element for the Beehive Kiln.
Price: $ 59.95
|
|
email to a friend |
|
|
|
 |
s26232
Tools - Cutting Mat - 8.5 x 12 inch (1)
Self healing cutting mat - for rolling and cutting out your clay. Gridded in inches and mm for your convenience. By the each.
Price: $ 12.99
|
|
email to a friend |
|
 |
s27235
Tools - Beehive Kiln - Controller (1)
Those of you who took the Michael David Sturlin class in the fall of 2010 - if you are looking for the little Beehive kiln that he was using for annealing - this is the controller that goes with it. Includes some instructions.
Price: $ 45.00
|
|
email to a friend |
|
Art Clay Silver™
