 |
88819081
Two Part Epoxy - Apoxie Paste - Khaki (Pack)
Apoxie Paste - permanently fiolle, bond, seal, customize and fabricate. Batter-like consistency - stirrable, but thick enough to tend to stay put. Spread it on thick or thin with a tool or craft stick. Tintable. Smooth with water before curing. Working time is approximately 2 hours after being mixed - 24 hours to fully cure to waterproof. Mix equal parts. 0.5 oz of part A and part B = 1 oz total. (Pack)
Price: $ 14.95
|
|
email to a friend |
|
 |
88819051
Two Part Epoxy Clay - Apoxie Sculpt - Kit - Playtime (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 227 grams of clay, colours are Red, Blue, Green and Yellow. (Pack)
Price: $ 33.95
|
|
email to a friend |
|
 |
88819030
Two Part Epoxy Clay - Apoxie Sculpt - Super White (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 19.25
|
|
email to a friend |
|
 |
88819002
Two Part Epoxy Clay - Apoxie Sculpt - White (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819001
Two Part Epoxy Clay - Apoxie Sculpt - Natural (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. Natural colour is a sort of putty colour. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
|
|
 |
88819006
Two Part Epoxy Clay - Apoxie Sculpt - Pink (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819011
Two Part Epoxy Clay - Apoxie Sculpt - Red (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819010
Two Part Epoxy Clay - Apoxie Sculpt - Orange (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819009
Two Part Epoxy Clay - Apoxie Sculpt - Brown (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819052
Two Part Epoxy Clay - Apoxie Sculpt - Kit - Desert Sunset (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 227 grams of clay, colours are Pink, Bronze, Orange, Natural. (Pack)
Price: $ 33.95
|
|
email to a friend |
|
|
|
 |
88819050
Two Part Epoxy Clay - Apoxie Sculpt - Kit - Earth Tones (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 227 grams of clay, colours are Black, Brown, Silver, and White. (Pack)
Price: $ 33.95
|
|
email to a friend |
|
 |
88819008
Two Part Epoxy Clay - Apoxie Sculpt - Yellow (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819007
Two Part Epoxy Clay - Apoxie Sculpt - Green (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819012
Two Part Epoxy Clay - Apoxie Sculpt - Blue (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819005
Two Part Epoxy Clay - Apoxie Sculpt - Bronze (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
|
|
 |
88819004
Two Part Epoxy Clay - Apoxie Sculpt - Silver Grey (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
88819003
Two Part Epoxy Clay - Apoxie Sculpt - Black (Pack)
Apoxie Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 2 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Contains 113.4 grams of clay (1/4 pound) in resealable containers. (Pack)
Price: $ 16.95
|
|
email to a friend |
|
 |
s29603
Two Part Epoxy Clay - Crystal Clay - Cotton Candy (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29599
Two Part Epoxy Clay - Crystal Clay - Fuchsia (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28320
Two Part Epoxy Clay - Crystal Clay - Rose (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
|
|
 |
s29600
Two Part Epoxy Clay - Crystal Clay - Copper (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29598
Two Part Epoxy Clay - Crystal Clay - Ruby (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29597
Two Part Epoxy Clay - Crystal Clay - Dark Brown (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29605
Two Part Epoxy Clay - Crystal Clay - Latte (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28321
Two Part Epoxy Clay - Crystal Clay - Sable (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
|
|
 |
s29604
Two Part Epoxy Clay - Crystal Clay - Sand Gold (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29601
Two Part Epoxy Clay - Crystal Clay - Dark Green (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28322
Two Part Epoxy Clay - Crystal Clay - Sage (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28323
Two Part Epoxy Clay - Crystal Clay - Turquoise (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s29602
Two Part Epoxy Clay - Crystal Clay - Blue Skies (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
|
|
 |
s29607
Two Part Epoxy Clay - Crystal Clay - Dark Purple (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28324
Two Part Epoxy Clay - Crystal Clay - Violet (Kit)
Crystal Clay is a two-part epoxy clay that is easily mixed and formed into any shape. Working time is approximately 1- 1.5 hours after being mixed The clay takes 12-24 hours to fully cure to waterproof. Simply mix and knead together equal sized lumps (you don't need to use it all at once - just wrap and store the unused portions - separately!) until all the streakiness is gone (about 2 minutes.) Includes 50 grams of clay, Vinyl gloves, beeswax/toothpick applicator (to pick up stones and place on clay), and Swarovski crystals to get you started. Pic of the whole kit. Full instructions inside. (Kit)
Price: $ 15.00
|
|
email to a friend |
|
 |
s28773
MetalFX - Metallic/Mica Powder - Unicorn White (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
SORRY, SOLD OUT
email to a friend |
|
 |
s28777
MetalFX - Metallic/Mica Powder - Midas Rose (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s28772
MetalFX - Metallic/Mica Powder - Copper Fire (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
|
|
 |
s30188
MetalFX - Metallic/Mica Powder - Hot Momma (1 gram)
Smokin'. Intense metallic red. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 3.45
|
|
email to a friend |
|
 |
s30187
MetalFX - Metallic/Mica Powder - Sunkissed Rose (1 gram)
Intense dark coppery pink. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s28775
MetalFX - Metallic/Mica Powder - Palomino Gold (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s28770
MetalFX - Metallic/Mica Powder - Sahara Gold (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s30189
MetalFX - Metallic/Mica Powder - Wild Lime (1 gram)
Limey yellowy goldy green. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
|
|
 |
s30190
MetalFX - Metallic/Mica Powder - Emerald City (1 gram)
I don't think we're in Kansas anymore, Toto. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s30191
MetalFX - Metallic/Mica Powder - Triton (1 gram)
A blue-green with gold highlights. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s30193
MetalFX - Metallic/Mica Powder - Honeymoon Bay (1 gram)
Rich, deep turquoise blue with tonnes of sparkly highlights. Metallic looking mica powder. Pour or shake onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 3.45
|
|
email to a friend |
|
 |
s30186
MetalFX - Metallic/Mica Powder - Sea Turtle (1 gram)
An ocean-going greenish blue. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s30192
MetalFX - Metallic/Mica Powder - Sapphire Eye (1 gram)
Rich sapphire blue - like the sapphire eye in the forehead of a statue it the middle of a lost jungle kingdom. Metallic looking mica powder. Pour or shake onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
|
|
 |
s30185
MetalFX - Metallic/Mica Powder - Purple Star (1 gram)
A glimmery purple with red overtones. Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
|
email to a friend |
|
 |
s28776
MetalFX - Metallic/Mica Powder - Moonlight Silver (1 gram)
Metallic looking mica powder. Pour onto epoxy clay after shaping, but while still fresh and adhesive. The powder adheres to the clay for a metallic look. (Not enamel - so no respirator needed.) Jar contains a generous gram - which is about a teaspoon full. Jar has a little insert with holes for shaking out the powder. The holes are covered with a plastic sticker to prevent leaks (it's clear and practically invisible) - you have to remove the sticker for the powder to flow! You can also pull out the insert if you want to just dump the powder out - but do this very carefully - as the powder has a tendency to jump out and get on everything. Don't do this over your keyboard! Non-toxic. By the pack of 1 gram.
Price: $ 2.45
|
SORRY, SOLD OUT
email to a friend |
|
 |
88819080
Two Part Epoxy - Safety Solvent - (1 oz)
For tooling, smoothing, texturing and cleaning Apoxie from tools, brushes and surfaces BEFORE set-up. Removes other sticky substances too. Clean up in soap and water. By the pack of 1 oz.
Price: $ 7.95
|
|
email to a friend |
|
 |
s28330
CrystalFX - Swarovski Chaton Mix - Dazzlin Diamond (1 gram)
Romantic or Edgy? Is the dazzling glitter of pure crystal the ultimate in in-your-face bling or the last word is soft romantic memories? You decide! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 8.95
|
|
email to a friend |
|
 |
s28329
CrystalFX - Swarovski Chaton Mix - Sweet as a Rose (1 gram)
As soft and sweet as a rose, delicate petals thinner than tissue paper - but strong enough to survive the winter and come back blooming! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 8.95
|
|
email to a friend |
|
|
|
 |
s28332
CrystalFX - Swarovski Chaton Mix - Brown Sugar Candy (1 gram)
Sweet and sticky goodness - makes everything just yummier! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 8.95
|
|
email to a friend |
|
 |
s28328
CrystalFX - Swarovski Chaton Mix - Spice it Up (1 gram)
Kick it up a notch! Spices and herbs and you've got a recipe for sizzling taste! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 8.95
|
|
email to a friend |
|
 |
s28327
CrystalFX - Swarovski Chaton Mix - Caribbean Wave (1 gram)
Ride the Wave. Sparkling blue water with the sun glittering so bright it blinds! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 9.95
|
|
email to a friend |
|
 |
s28326
CrystalFX - Swarovski Chaton Mix - Smokey Plum (1 gram)
Plum Good! Smokey, plummy, sultry, come-up-and-see-me-sometime. 'Cuz when ah'm bad, ah'm better! Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 9.95
|
|
email to a friend |
|
 |
s28331
CrystalFX - Swarovski Chaton Mix - Night Fog (1 gram)
Going home after midnight, and the streets are glistening wetly - a heavy fog has rolled in and all has been transformed into a strange, magical world of infinite possibilities. (Notice how the different colour backgrounds really change the look?) Our own, custom mixes of small, foiled, pointed-back Swarovski rhinestones (Chatons)- excellent for using with the epoxy clay. A variety of colours and sizes, packaged by weight. Our mixes are made to a specific recipe, but of course, the actual count and ratio of stones per package may vary. One gram is about a scant quarter teaspoon, for reference. The colours will look different compared to their background, so bear that in mind when picking the background colour. Inset image gives you a rough idea of what the mix can look like. (They have a tendency to fall face down, hence so many upside-down ones in the picture.) By the pack of 1 gram.
Price: $ 8.85
|
|
email to a friend |
|
|
|
Epoxy Clay, Rhinestones and Metallic Powder! Oh My! 
ogether - and you can make stuff like the bracelet to the right!
The colour of the clay makes a big difference to the over all effect that the stones have. Compare these two on the left. They are the same mix of crystals, but the white vs black clay background make them look dramatically different. 
