 |
s25107
Tools - Bent Chain Nose - Wubbers Classic (1)
Well made, polished tools. Bent Chain Nose is a tapered, flat jaw with the outside rounded, like the chain nose, but with the tips bent at an angle. Use to get into tight places, or use the back of the curve for opening jumprings. Sprung, and with padded handles. For use with 12 to 28 gauge wire. By popular request - the Wubbers line-up of tools. About 6.5 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s23245
Tools - Bezel Mandrel - (1)
Polished steel mandrel for forming bezels. Size ranges from 4.5 mm at tip to 12 mm before the notch. NOT big enough to make finger rings on. Light coating of machine oil for shipping and protection. Wipe it off when you get it. By the each.
Price: $ 10.95
|
|
email to a friend |
|
 |
s21558
Tools - Canvas Tool Pouch - Khaki (1)
Trifold canvas pouch with slots for tools, and sturdy velcro closure. Tuck at least 3 pairs of pliers (or 6 if smaller than the ones I tried) plus maybe an awl or something - take your tools on the road or to classes. Tip - if you are taking your tools to a class or workshop - mark them with tape or a dab of nail polish so you can identify yours later. Another view By the each.
Price: $ 6.00
|
|
email to a friend |
|
 |
s25104
Tools - Chain Nose - Wubbers Classic (1)
Well made, polished tools. Chain nose is a tapered, flat jaw with a gently curved top. Sprung, and with padded handles. For use with 12 to 28 gauge wire. By popular request - the Wubbers line-up of tools. About 6.5 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s21557
Tools - Coil Cutting Pliers - (1)
And another highly specialized tool! These hold the coil of wire while you saw the coil into jumprings. Close up from the other side Big shot These are for cutting coiled wire into jumprings. Comes with instructions. The skinny pin out the back is for bracing against the work bench. The slots in the side are for the blade of the saw. They don't actually do the cutting. You do that. ;-)
Price: $ 31.95
|
|
email to a friend |
|
|
|
 |
s23258
Tools - Flint Striker/Sparker - (1)
Striker, sparker, lighter - whatever you want to call it. For lighting torches, gas flames, etc. Hold the sparker so it will cup the gas as it comes out, turn on the gas, and squeeze the handle - bearing down so that the flint makes strong contact with the roughed steel surface. If you don't get it the first couple of times, turn off the gas and practice until you can reliably get a spark each time. Actually - do the practice part first. The flint does wear down - so you will need to adjust it as it wears, and eventually replace it. Failing to do this will lead you to believe that the sparker does not work and to steal your brother's lighter on a regular basis - causing him to accuse you of being a closet smoker. The incessant teasing will lead you to take up smoking for real - which will lead you to a life of crime and hustling your jewelry on street corners. Have you seen the price of cigarettes? Avoid a life of crime - buy the replacement flints. By the each.
Price: $ 2.50
|
|
email to a friend |
|
 |
74529499
Tools - Glasses - Safety (Pair)
If you are going to hammer, cut, saw, file, patina or whatever - it behooves you to keep stuff out of your eyes. Your precious eyes. These are big enough to fit over your prescription or reading glasses. The arms fit tight to hold on your face. Any they are less ugly than some safety glasses.
Price: $ 6.99
|
|
email to a friend |
|
 |
s23246
Tools - Hammer - Brass and Nylon (1)
4 ounce weight. .5 inch diameter. Replaceable ends. Comes with tool for tightening or removing the ends. Flatten metal, work harden. etc.
Price: $ 12.95
|
|
email to a friend |
|
 |
s23266
Tools - Hammer - Chasing (1)
11 inches long. 1 1/8 inch wide surface (29 mm). This is the hammer you use for chasing people through the house while making a horror movie. No? Ok - Chase means to "ornament by indenting using tools without a cutting edge" and is from "enchaser" - meaning: "to set." Happy? Use it work harden and flatten wire, texture metal, etc. Not too heavy. Nicely balanced. Slightly rounded face. Use the other side for riveting and metal design.
Price: $ 14.45
|
|
email to a friend |
|
 |
s24401
Tools - Hammer - Chasing - German Style (1)
New "German Style" chasing hammer. Hardwood handle, wedge and oblong hole to attach head to prevent pivoting. Flat face, pein side is slanted for better ergonomics. Case hardened stainless steel. Use it work harden and flatten wire, texture metal, etc. Use the other side for riveting and metal design. 11 inches long. A chasing hammer is usually used to hit a tool that hits the metal.
Price: $ 16.25
|
|
email to a friend |
|
|
|
|
|
 |
s24383
Tools - Hammer - Riveting (1)
Riveting hammer - one end is flat for general purpose and the other is chiseled for spreading the rivet heads. Handle is seasoned ash. Square face, .5 inch across, 3 inch long head, total weight, 4 oz. Overall length, 10.5 inches. Made in Germany.
Price: $ 14.15
|
|
email to a friend |
|
|
|
 |
s28818
Tools - Hammer Replacement Face - Brass (1)
Replacement face for Tools - Hammer - Brass and Nylon (1). Replace if it gets damaged, or if you want to change it's shape. Soft brass for hammering - you can also file to adjust shape if you wish. 15mm
Price: $ 1.95
|
|
email to a friend |
|
|
|
|
|
 |
s26246
Tools - Offset Punch - .999FS (1)
Punch for imprinting on metal, or metal clay (before or after firing). Offset - with the bend - to stamp inside rings, etc. Makes the .999FS symbol. (99.9 % pure silver, fine silver) Add prestige and value. Mark is about 2 x 4 mm across. Attention By law, you MUST NOT imprint this mark on jewellery that has an assayable metal content less than 99.5% silver. This mark is intended to designate items that are fine silver.
Price: $ 9.55
|
|
email to a friend |
|
 |
s21576
Tools - Plier Set - Beaders - Slimline (1)
A smaller set of pliers, for smaller hands - all about 4.5 inches long. An inexpensive starter set. All are double leaf spring and box joint construction. Includes, semi-flush sidecutters, chain nose, flat nose, round, and bent nose. And room for one more too. Another view and another view. Made in Pakistan. By the each.
Price: $ 35.95
|
|
email to a friend |
|
 |
s23236
Tools - Punch - .925 (1)
Punch for imprinting on metal. Makes the .925 symbol. Add prestige and value. Mark is about 2 mm across. Attention By law, you MUST NOT imprint this mark on jewellery that has an assayable metal content less than 92.5% silver. This mark is intended to designate items that are sterling silver.
Price: $ 14.55
|
|
email to a friend |
|
 |
s23237
Tools - Punch - .999FS (1)
Punch for imprinting on metal, or metal clay (before or after firing). Makes the .999FS symbol. (99.9 % pure silver, fine silver) Add prestige and value. Mark is about 2 x 4 mm across. Attention By law, you MUST NOT imprint this mark on jewellery that has an assayable metal content less than 99.5% silver. This mark is intended to designate items that are fine silver.
Price: $ 9.55
|
|
email to a friend |
|
|
|
 |
s23235
Tools - Punch - Copyright (1)
Punch for imprinting on metal, metal clay (before or after firing) or polymer clay. Makes the C in a circle © symbol. Protect your designs and add prestige. Mark is about 3 mm across.
Price: $ 14.55
|
|
email to a friend |
|
|
 |
s23231
Tools - Ring Holding Pliers - (1)
These are used to hold rings (finger rings) while working on them, setting stones, filing, etc. Curved cups in the curved jaws hold the sides of the rings and hold them more securely and with less risk of damage than a vise. Made in Taiwan.
Price: $ 12.95
|
|
email to a friend |
|
 |
s25105
Tools - Round Nose - Wubbers Classic (1)
Well made, polished tools. Round nose is a tapered, round jaw. Sprung, and with padded handles. For use with 12 to 28 gauge wire. By popular request - the Wubbers line-up of tools. About 6.5 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
74550020
Tools - Shape Stamp/Punch Collection - Circles (Set)
Three circles - 1.5 mm, 3.2 mm, 4.8 mm.
Price: $ 15.95
|
|
email to a friend |
|
|
|
 |
s23256
Tools - Steel Scribe - (1)
Pointy, scratchy thingy for making marks on metal. Nice wooden handle. Scratches in metal do not wear off like marker and leave you scratching your head? How long was this supposed to be? And being thinner - are more accurate.
Price: $ 5.25
|
|
email to a friend |
|
|
|
 |
s26242
Tools - Thumbsaver Stamp Holder - (1)
Use these as a handle to hold your punches and stamps - so that you don't hammer your hand. Twist the round end until the screw disappears, then insert stamp and tighten till screw holds stamp in place. et voila - instant handle! (The piece of wood is a prop - to get the angle right so you can see. Nothing to do with the tool.)
Price: $ 22.25
|
|
email to a friend |
|
 |
s21553
Tools - Tube Cutting Pliers - (1)
Now here is a highly specialized tool! This is for holding tubing firmly while enabling you to saw it off straight. Lampworkers who are cutting tubing for bead lining will definitely want to take a look at this! Three sizes of notch for holding different sizes of tubing firmly without crushing, plus a groove cut out of the middle of the jaws of the pliers for you to get your saw blade down. Cool, eh? Can accommodate tubing (or rods) from 2 mm to 10 mm. Close up Made in Pakistan.
Price: $ 31.95
|
|
email to a friend |
|
|
|
|
|
|
|
 |
74550013-01
Tools - 2 mm Letter Stamp/Punch Collection - Modern Print Lowercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 2mm
Price: $ 32.95
|
|
email to a friend |
|
 |
74550014-01
Tools - 2 mm Letter Stamp/Punch Collection - Playground Lowercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 2mm
Price: $ 32.95
|
|
email to a friend |
|
|
|
 |
74550014-00
Tools - 2 mm Letter Stamp/Punch Collection - Playground Uppercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 2mm
Price: $ 32.95
|
|
email to a friend |
|
 |
74550010-01
Tools - 3 mm Letter Stamp/Punch Collection - Elegant Lowercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 3mm
Price: $ 32.95
|
|
email to a friend |
|
|
|
|
|
|
|
|
 |
74550011-01
Tools - 3 mm Letter Stamp/Punch Collection - Typewriter Lowercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 3mm
Price: $ 32.95
|
|
email to a friend |
|
 |
74550011-00
Tools - 3 mm Letter Stamp/Punch Collection - Typewriter Uppercase (Set)
Alphabet - A - Z plus &. Includes nice little organizer. Imprint on metal, or metal clay (before or after firing), polymer clay (before baking). 27 pieces. Instructions on back of package, in case you can't figure out how to hit something with a hammer. A nice touch is that you hold the punch with your thumb over the logo on the side, you always place the letter right side up. However, they do NOT have the actual letter written on the side, so I suggest that you immediately take a sharpie and write the letter on the side to save yourself grief later. Unless you are the sort of person that uses something and immediately puts it away. In which case, there is no hope for you. If you buy multiple sets, you'll want to mark them to differentiate them too - so you don't accidentally mix up the type faces. Feel free to do it on purpose though. Close up of font. 3mm
Price: $ 32.95
|
|
email to a friend |
|
 |
74550021-01
Tools - 6 mm Shape Stamp/Punch Collection - Astronomy (Set)
Three heavenly shapes - Crescent moon, 5-point star, Sun or starburst. Close up. 6mm
Price: $ 19.95
|
|
email to a friend |
|
|
|
|
|
|
|
 |
s26244
Tools - Large Bail Making Pliers - Wubbers (1)
All sorts of ways to use these. Two round - non-tapered jaws, of two different diameters. 8.8 mm and 6.8 mm. Well made, polished tools. Sprung, and with padded handles. About 6.75 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. Laughs at 12 gauge wire. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s25108
Tools - Medium Bail Making Pliers - Wubbers (1)
All sorts of ways to use these. Two round - non-tapered jaws, of two different diameters. 4.9 mm and 2.9 mm. Well made, polished tools. Sprung, and with padded handles. About 6.75 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. Use with 16 gauge wire and finer. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s25106
Tools - Medium Flat Nose - Wubbers Classic (1)
Well made, polished tools. Flat nose is a tapered, flat jaw. Sprung, and with padded handles. For use with 12 to 28 gauge wire. By popular request - the Wubbers line-up of tools. About 6.5 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. By the each.
Price: $ 29.95
|
|
email to a friend |
|
|
|
 |
s26243
Tools - Small Bail Making Pliers - Wubbers (1)
All sorts of ways to use these. Two round - non-tapered jaws, of two different diameters. 1.7 mm and 2.4 mm. Well made, polished tools. Sprung, and with padded handles. About 6.75 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. Use with 20 gauge wire and finer. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s26245
Tools - Small Flat Pliers - Wubbers (1)
Classic flat nose pliers. Two tapered jaws - no teeth. Taper from 8 - 2 mm. Well made, polished tools. Sprung, and with padded handles. About 6.75 inches long. A little larger than some of the other pliers, nice solid feel. Cushioned grips with texture to prevent slipping. By the each.
Price: $ 29.95
|
|
email to a friend |
|
 |
s21551
Tools - Cutters - Shear Cutter - (1)
Comfortable molded handle. Spring action. Max recommended wire size to cut - 1.3 mm. Approx 6 inches long. Made in Italy. By the each.
Price: $ 11.95
|
|
email to a friend |
|
 |
s21552
Tools - Cutters - Side Cutter - Semi-flush (1)
Basic starter tool - Box joint. Double leaf spring action. Another view Made in Pakistan. By the each.
Price: $ 11.95
|
|
email to a friend |
|
 |
s24395
Tools - Cutters - Tapered Flush Cutter - (1)
Tapered head design allows for improved access in tight areas and added precision. Shear action for a smooth, flush cut. Tough, alloy steel. Do NOT NOT NOT use these with memory wire. 5 inches overall length. By the each.
Price: $ 29.35
|
|
email to a friend |
|
|
|
 |
helplht6
Tools - Cutters - 5 inch Memory Wire Cutters - (1)
Sick of ruining wire cutters? Tired of struggling to cut memory wire. Try these - cuts jus' like budda. By the each.
Price: $ 10.95
|
|
email to a friend |
|
 |
s21544
Tools - Cutters - Flush Side Cutter - Ergonomic - Lindstrom (1)
Top of the line pliers - state of the art hand tool design, function and performance. Bio-spring handle has an adjustable spring for spring-loaded action and can be adjusted for 3 levels of "springiness." Micro-touch handles are comfortable in the hand and provide superior grip and control. About 6 inches long. Full view Made in Sweden. By the each.
Price: $ 77.40
|
|
email to a friend |
|
 |
s27352
Tools - Cutters - Flush Side Cutter - Ergonomic Small Oval Head - Lindstrom (1)
Top of the line pliers - state of the art hand tool design, function and performance. Bio-spring handle has an adjustable spring for spring-loaded action and can be adjusted for 3 levels of "springiness." Or left off entirely. Micro-touch handles are comfortable in the hand and provide superior grip and control. About 6 inches long. Full view These are the same cutters from the set - one of our gals wrecked hers and wanted to get a replacement. Made in Sweden. By the each.
Price: $ 67.80
|
|
email to a friend |
|
 |
s23265
Tools - Cutters - Flush Side Cutter - Heavy Duty - Lindstrom (1)
These turned out to be somewhat larger than we anticipated. But the good news is - they weren't kidding about the heavy duty. Whatever you want to cut. These cutter laugh at memory wire. I've cut through 2.5 mm copper wire with 'em. The pliers sneered at it. "Is that all you've got. Bring it on!" Overall - 9 inches long. Nine. Just so you're not surprised at the size of them. Made in Sweden. By the each.
Price: $ 75.55
|
|
email to a friend |
|
 |
s21546
Tools - Cutters - Ultra Flush Side Cutter - Ergonomic - Lindstrom (1)
Top of the line pliers - state of the art hand tool design, function and performance. Bio-spring handle has an adjustable spring for spring-loaded action and can be adjusted for 3 levels of "springiness." Micro-touch handles are comfortable in the hand and provide superior grip and control. About 6 inches long. Full view Made in Sweden. By the each.
Price: $ 83.40
|
|
email to a friend |
|
|
|
 |
s26831
Tools - Metalsmithing - Hammer - Goldsmith (1)
10.5 inches long. 1.25 lbs. Traditional German style hammer - for moving metal. Use for forging - hammering metal directly. As with most hammers, you need to do some final finishing to dome the face of it. It comes flat.
Price: $ 24.95
|
|
email to a friend |
|
 |
s26833
Tools - Metalsmithing - Hammer Handle - (1)
Get a grip. I don't want to hammer this home, but I think you can get a handle on it. As the old jeweler said, "I've been using the same hammer for 45 years - I've replace the head twice and the handle three times, but it's still the same hammer." Replace a handle or build your own tool. 10 inches long. This is a chasing hammer style handle.
Price: $ 5.25
|
|
email to a friend |
|
 |
s21554
Tools - Pliers - Chain Nose - (1)
Basic starter pliers. Box joint. Smooth jaw - tapers to 1.6 mm. Approx 6 inches long. Made in Pakistan.
Price: $ 11.95
|
|
email to a friend |
|
 |
s21543
Tools - Pliers - Flat Nose - Ergonomic - Lindstrom (1)
Top of the line pliers - state of the art hand tool design, function and performance. Bio-spring handle has an adjustable spring for spring-loaded action and can be adjusted for 3 levels of "springiness." Micro-touch handles are comfortable in the hand and provide superior grip and control. About 6 inches long. Jaw width is 3.7 mm. Full view Made in Sweden.
Price: $ 59.40
|
|
email to a friend |
|
 |
s23242
Tools - Pliers - Smooth Jaw Flat Parallel - (1)
Jaws stay parallel through the entire range of their movement, and along their entire length. Sprung to stay open - squeeze to close. Come with protective layer of oil to prevent rusting. Some seem a little stiff at first - but they seem to limber up with use. Maximum opening of jaws is 10 mm. Excellent for wire, as the parallel action significantly reduces marking of the wire.
Price: $ 21.95
|
|
email to a friend |
|
|
|
 |
s23234
Tools - Pliers - Split Ring - (1)
Pliers for opening split rings. These ones actually work well, without bending and mangling the split ring - due to having a finer point. A specialty plier, for those with soft fingernails (moi!) and a high degree of frustration about split rings.
Price: $ 9.45
|
|
email to a friend |
|
 |
helpl940
Tools - Pliers - (Fine) Magical Crimp Forming Pliers - (1)
Explicitly designed to work with 2 mm crimps tubes (sterling silver or gold filled) and .014 and .015 beading wire. These tools form your crimp into a round bead, while still acting as a crimp. Close up of tool. Instructions are included. Use these pliers with our 2 mm crimps on our findings page. Do these work - what do we think? So far, they seem to do what they say - it takes a couple of practice crimps to do a smooth job. I think these would really shine in floating and illusion necklaces.
Price: $ 20.00
|
|
email to a friend |
|
 |
helpl950
Tools - Pliers - (Medium) Magical Crimp Forming Pliers - (1)
Explicitly designed to work with 2 mm crimps tubes (sterling silver or gold filled) and .018 and .019 beading wire. These tools form your crimp into a round bead, while still acting as a crimp. Close up of tool. Another close up. Instructions are included. Use these pliers with our 2 mm crimps on our findings page. Do these work - what do we think? So far, they seem to do what they say - it takes a couple of practice crimps to do a smooth job. I think these would really shine in floating and illusion necklaces.
Price: $ 20.00
|
|
email to a friend |
|
 |
s21547
Tools - Pliers - Long Chain Nose - Lindstrom (1)
Excellent pliers - comfortable molded handle grips. Double action leaf springs. About 6 inches long. Jaws taper to 1 mm. Full view Made in Sweden.
Price: $ 49.95
|
|
email to a friend |
|
