(Components list at bottom of page)
Bling it On
by: Malliga Nathan
Bling it on, Bang the Gong, Put it On!
It's so sparkly I could die!
Any of the rhinestone cup chains colours would look fabulous (and we have more coming). Rough up the surface of the metal - both the brass cuff and the back of the cup chain, to ensure adhesion. You could choose a narrower cuff base too if you wanted something more restrained (but why???) ;-)
Pre measure and cut the cup chain. (4 inch segments works!)
Apply the glue to the back of the cup chain (a toothpick is a useful tool), and set into place on the cuff. Use a few clothes pegs if necessary to hold the chain in place. (Although they will probably just stay in place.)
Wait for the glue to cure - and be fabulous!
Note - originally, we listed this as the 2 inch cuff and 26 inches of chain. Malliga has since gotten back to me with the actual quantities - which is the 1.5 inch cuff and 25 inches of chain. If you want to make the wider cuff - allow for more chain.
Clicking on components links will open a new window so that you don't lose this page.
|Qty: 1||25435002 Findings - 1.5 inch Cuff Bracelet - Brass||Price: $ 3.88|
|Qty: 25||s35830 Rhinestone Chain - Brass - 6.25 mm (ss29) Prong Set Rhinestone Cup Chain - Fuchsia (1 inch)||Price: $ 0.99|
|Sorry, Out of Stock|
| s23256 Tools - Steel Scribe - |
(You can use this to scratch up the surface, or sand the surface with sand paper, or even an emery board. )
|Price: $ 6.32|
|88824949 Tools - Adhesive - 2 oz E6000 Glue -||Price: $ 10.24|
|Home Page||Main Bead Listing||Read our Blog||Email us a question||FAQs||Stay Informed
(join our mailing list)
|Tollfree +1.877.473.BEAD (2323) | +1.416.751.1911|
|Copyright 2013 - BeadFX 2012. All rights reserved|