(Components list at bottom of page)
Black Orb Night
by: Kelly Garland
This is a interesting and fun bracelet that can go casual or uptown. I've used jump rings in the examples but these can be eliminated if you have a smaller sized wrist or prefer them without. This is a super easy project and should take you no more than 15 mins.
1) Cut required length for wrist. You want at least 1 extra inch of wire at each end for your crimping and loops. Also keep in mind the larger diameter of the beads will also use up an additional length of wire. I like to add an extra inch and once I've secured one end and stacked the beads, I can lay it around my wrist for a proper size check.
2) Add your crimp securely and then your crimp cover. Note: If you are eliminating the jump rings, attach one half of the clasp to the loop prior to slipping it through the crimp, then proceed as usual by securing the crimp..
3) Starting with a silver lentil, stack the beads in groups of 10 then add another lentil. Make sure the mushrooms are sitting flush with the next beside it. This is easily done by holding your unfinished bracelet vertically and twisting the beads in a clockwise manner.
3) Once you've reached your desired length, end with another lentil and finish off the remaining end. Make sure the beads are snug and your crimped loops at the ends are nice and snug.
Clicking on components links will open a new window so that you don't lose this page.
|Home Page||Main Bead Listing||Read our Blog||Email us a question||FAQs||Stay Informed
(join our mailing list)
|Tollfree +1.877.473.BEAD (2323) | +1.416.751.1911|
|Copyright 2017 - BeadFX 2012. All rights reserved|
Your card will be charged in your usual currency based on the rate offered to you by your credit card company.