Use on it's own or with the glue-in end caps to create a finished pendant with lampwork beads or other beads with a 2.5mm (3/32in) diameter hole. Also try as a finish for beaded tubes and ropes. Use a space-filling glue slightly flexible adhesive, such as E6000 or 5-minute Epoxy. Ensure the bead is cleaned inside, and dry. Apply glue in hole and to post, let set for a minute, then insert post into hole. Clean up any oozage immediately. Let set at least 24 hours before hanging. A nice finishing touch.
5mm x 18mm By the each.