InspirationFX: Simplicity in Red – Two

Simplicity in Red – Two

Designed by: Anne Marie Desaulniers

Though minimalist in style, this set will create quite the impact! A compliment to the “Simplicity in Red” necklace, that was posted a few weeks ago. As the holidays tend to be busy, it’s important to have something simple, to accessorize either that little black dress, or a cozy sweater, and pair of jeans. A fairly economical solution, as you will be using many of those leftover components from the earlier “Inspiration”. You will need to buy another package of the lovely Scarlet faceted rounds though!


1. For Bracelet – cut one 7″ length of chain for bracelet (adjust length if required).

2. Insert the G-S Hypo Cement applicator, into one End Cap with Loop for Beading Chain, and add one drop of glue.

3. Insert one end of chain, into one End Cap with Loop

4. Squeeze End Cap with Loop with chain nose pliers (crimping or flat nose pliers could also be used). You will need to squeeze fairly hard, to flatten End Cap slightly.

5. Set aside to dry.

6. String 3 faceted rounds, directly onto the chain (it’s a bit of a tight fit, but I discovered that you could do this, while playing around with the leftovers from the first project).

7. Centre faceted rounds in the middle of the chain.

8. Add an End Cap with Loop to the other end of each chain, repeating steps 2 through 5.

9. Let dry overnight.

10. Connect one 6 mm jump ring, to End Cap with Loop (at the end of the chain). Close jump ring

11. Connect a 4-mm jump ring, to the remaining End Cap with Loop, and then to the 12 mm Lobster Claw. Close jump ring.

12. For Earrings – cut two 1″ lengths of chain

13. For each 1″ length of chain, complete steps 2 through 5.

14. For each 1″ length of chain, complete steps 8 and 9.

15. Add one faceted round, to one 2″ Big Ball Headpin.

16. Make wrapped loop dangle.

17. Repeat steps 15 & 16, to make a second wrapped loop dangle.

18. Connect one wrapped loop dangle, to one End Cap with loop, with a 4-mm jump ring. Close jump ring.

19. Repeat for second wrapped loop dangle.

20. Connect one Leverback Earring Finding, to the remaining End Cap with Loop, with a 4-mm jump ring. Close jump ring.

21. Repeat for second Leverback Earring Finding.

22. Go forth and be merry! Your “Simplicity in Red – Two” set is complete.

Tools Used:

Chain nose pliers

Round nose pliers

Flush cutter



Go to our components list for this project and to buy what you need!

Need some help with some of the techniques? Check our tips page.

Leave a Reply

Your email address will not be published. Required fields are marked *

By submitting this form, you are consenting to receive marketing emails from: beadFX Inc., 19 Waterman Ave., Unit #2, Toronto, ON, M4B 1Y2, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact