(Components list at bottom of page)

by: Dwyn Tomlinson

I call this "Purity" because the colours remind me of the innocence and promise of a warm summer morning. Of course, you can choose your own colours too - and maybe then it will remind you of something else instead!

I have two marks on my designing bench - which is a name that I use for the folding table where I pile my beads. I have two marks, about 7.5 inches apart, labeled "Perfect Bracelet" - so when I string, I measure
against that for length. So adjust the length of this as required for your wrist. Again, I am using the Stretchy cord, as I love how simple it is to use and that I don't need to futz with a clasp when putting it on and taking it off.

Start by gluing the cabochon into the finding. The finding has a small hole in the back, which is good for getting the glue to cure, but you don't want the glue to ooze out either, so apply glue to the back of the
cabochon, put it into the finding, making sure that the glue has spread to stick to the finding, and then flip it face down and leave it to cure overnight.

Once cured, add a jumpring to the loop.

String a half a bracelet length, more or less, with one colour of donuts. Add the cabochon dangle charm, on it's jumpring, and then string the other colour on the other half. Knot the stretchy cord to itself with a square knot and a surgeon's knot.  Add one donut, remember this, and then string more donuts, half and half of the colours again, so one side will be one colour and one side will be the other colour. Mine came out a little uneven because I had another colour I was going to use and then decided it didn't work as well and took them back off. You should have strung one more donut than the first strand. Now make the loop and knot the stretchy cord in a circle, but not at the knot, but after that first donut that I told you to add. So you will end up with a donut spacer between the two strands of donuts.

Grab another jumpring, and open it (remember - only twist to the side to open jumprings) - and add it to the second strand, at the same count of donuts as the first, and then link it to the other jumpring with the dangle. This keeps the strands together and shares the weigh of the dangle.

Seal the knots with a drop of Hypo-tube cement, let it cure, trim the ends of the knots, and you are good to go!

*BONUS* Purity Earrings

Dab a little bit of glue on the back of the cabochon and place into the bezel setting. Lay flat while waiting for the glue to cure fully before wearing. The fishhooks are already attached to the bezel for you!

Now you are really good to go!!!

email to a friend

Components Clicking on components links will open a new window so that you don't lose this page.
	Qty: 1	24901007-00 Findings - 21mm Round Bezel Earrings - Silverplated (Pair)	Price: $ 19.19 per	In Stock
	Qty: 2	s38616 Firepolish - 9x6mm Faceted Donut - Aqualescent Opal (strand 25)	Price: $ 5.71 per	Sorry - this item is unavailable.
	Qty: 2	s38644 Firepolish - 9x6mm Faceted Donut - Water Beryl (strand 25)	Price: $ 8.61 per	Sorry - this item is unavailable.
	Qty: 3	s49418 Glass - 18mm Round Cabochon - Blue Turquoise Lumi (1 for bracelet and 2 for the earrings)	Price: $ 2.70 per	Sorry - this item is unavailable.
	Qty: 1	22801026 Jump Rings Open - 6mm - Silver Plated (100) (any silver jumpring from 5 - 7 mm will do - you only need 2)	Price: $ 3.95 per	Sorry - this item is unavailable.
	Qty: 1	s49016 Rivoli Setting - ID 18mm Art Nouveau Bezel - Bright Silver	Price: $ 5.18 per	In Stock
	Qty: 1	25002009 Stringing - .7mm x 25m Stretch Bead Cord - Clear (Spool) (although the way I'm going through this stuff - you might want to get this instead 31371)	Price: $ 8.95 per	In Stock
	Qty: 1	88827972 Tools - Adhesive - G-S Hypo-tube Cement -	Price: $ 11.95 per	In Stock
	Qty: 1	s37671 Tools - Adhesive - Tiny E6000 Glue - (Pack of 4)	Price: $ 12.95 per	In Stock